Turn the ignition , wait at least one minute, then start the engine and let it idle in Park for one minute to recalibrate.
Turn the ignition to (engine off) without touching the brake. nissan-tcm
When a TCM is physically replaced—often alongside a new valve body or transmission assembly—it must be programmed or "calibrated" to function correctly. Turn the ignition , wait at least one
: Some technicians suggest a variation: turn the key to "ON," press the gas to the floor, turn the key to "OFF" (while still holding the pedal), release the pedal, and wait 2–5 minutes before starting. Programming and Replacement : Some technicians suggest a variation: turn the
Wait 3 seconds, then fully press and release the gas pedal within 5 seconds.
Wait 7 seconds, then press and hold the gas pedal for about until the Check Engine light blinks.