Mastercam 2017 For Solidworks Tutorial (lathe) -

Go to Tools > Add-ins and ensure Mastercam 2017 is checked.

In the parameters, ensure you have a "Lead In" and "Lead Out" so the tool doesn't just plunge straight down into the material. 4. Roughing and Finishing This is where the shape happens.

Make sure your X-coordinates go slightly past the center point (e.g., X -0.05) to ensure the part actually drops off without leaving a "stub." 6. Verify and Post Never send code to the machine without checking it first. Mastercam 2017 for SOLIDWORKS Tutorial (Lathe)

You can’t cut air (well, you can, but it’s not productive).

If you’re still rocking , you’re using one of the most stable versions of the software. Here is a blog-style guide to help you (or your readers) get a lathe part from a SOLIDWORKS model to G-code. Go to Tools > Add-ins and ensure Mastercam 2017 is checked

Pick your tool (typically a standard 80-degree diamond like a CNMG).

In turning, your Z-axis must be the centerline of the part, and the X-axis is your diameter. Mastercam usually handles this, but it’s worth double-checking that your SOLIDWORKS Top or Right plane aligns with your machine's orientation. 2. Define Your Machine and Stock Roughing and Finishing This is where the shape happens

This is critical. You need to tell Mastercam the size of the raw bar stock. Use the "Make from 2 points" or "Cylinder" options. Don't forget to add a little extra on the face for a facing cut and enough "meat" in the back for the chuck jaws to grab! 3. The Facing Operation Always start by cleaning up the face of the part. Select Lathe Face .