Kulachok Postroenie Chertezha Po Dannym Velichinam Gdz Bolotov V.p Info

) that allows the drawing to fit the sheet while maintaining accuracy.

) which represents the "dwell" or starting point of the follower's motion. ) that allows the drawing to fit the

: Divide the cam's rotation into equal sectors (e.g., every 15∘15 raised to the composed with power 30∘30 raised to the composed with power ) corresponding to the points on your displacement diagram. : At each angular position, measure the lift

: At each angular position, measure the lift from the displacement diagram and mark it radially outward from the base circle. : Before drawing the profile, construct a motion

: Often used to smoothly transition between different radii or curves, such as arcs and straight lines.

: Use thin lines for construction and thick lines for the final cam profile to ensure clarity.

: Before drawing the profile, construct a motion graph (displacement diagram). This tracks the follower's lift relative to the cam's rotation angle (usually 360∘360 raised to the composed with power