Uses a Serial Data Line ( SDA ) and a Serial Clock Line ( SCL ).
I2C communication is master-controlled. The master initiates, manages, and terminates communication, generating the clock signal.
The master releases the SDA line to high while SCL is high, signaling the end of transmission. Advantages and Limitations Understanding I2C I2C Overview
Each slave device has a unique 7-bit (or 10-bit) address, eliminating the need for complex Chip Select (CS) lines used in SPI.
SDA and SCL are connected to a voltage source via pull-up resistors, allowing devices to pull the lines low without creating short circuits. Uses a Serial Data Line ( SDA )
The master sends the 7-bit unique address of the target slave, followed by a R/W bit (0 for write, 1 for read).
I2C (Inter-Integrated Circuit), often pronounced "eye-squared-see" or "eye-two-see," is a popular, synchronous, multi-master/multi-slave communication protocol invented in 1982 by Philips Semiconductors (now NXP). It is used for short-distance, intra-board communication between a processor and low-speed peripherals such as sensors, LCDs, and memory chips. Its hallmark is using only two wires for communication, making it highly efficient for managing multiple devices on a single bus. The master releases the SDA line to high
Multiple masters can control the same slave, and multiple slaves can reside on the same bus.