The detector is connected via a (DPLS) to a controller, such as the S2000-KDL or S2000-KDL-2I.
The (specifically models like DIP-34A-03 or DIP-34A-04) is an addressable analogue smoke detector used in the "Orion" integrated security system by Bolid. Connection Overview
Typically used for the positive (+) line of the DPLS. dip 34a shemy podkljuchenija
To help you further, would you like the for a specific model (like the 03 vs the 04 with an isolator) or details on how to program the address ?
Usually ceiling-mounted with a standard mounting base; specific kits (MK-1, MK-2) are available for suspended ceilings. The detector is connected via a (DPLS) to
You must strictly observe the "+" and "–" polarity of the loop when connecting to the detector's base. Terminals:
Can be used to connect the cable shield (screen) if required. Key Specifications Power Supply: 8V to 11V provided directly through the loop. Current Consumption: Maximum 0.5 mA in standby. To help you further, would you like the
💡 After physical connection, you must assign a unique address (1–127) to each detector using the UProg software or a programming command from the S2000M console.