Dcs_fa_18c_hornet_episode_3_preflight_startup_t... Review

: Repeat the process by moving the crank switch to LEFT and advancing the left throttle to IDLE at 25% RPM. 3. Systems Initialization

: Set the battery switch to ON (Right Console). dcs_fa_18c_hornet_episode_3_preflight_startup_t...

: Turn the APU switch to ON. Wait for the green "Ready" light before attempting engine crank. : Repeat the process by moving the crank

: Power on the Radar (set to OPR), RWR , IFF , and Data Link systems. 4. Taxi and Takeoff : Turn the APU switch to ON

: Rotate the INS knob to GROUND (or CV if on a carrier). For faster alignment, select Stored Heading on the HSI page.

: Press the FCS Reset button. Perform the Flight Control System BIT test by holding the FCS BIT switch on the right wall while simultaneously pressing the FCS OSB on the right DDI.

: Close the canopy while waiting for the APU to cycle up. 2. Engine Startup